pulleys

[136ED]

i need to buy new pulleys for a 350 i purchased, the problem is it has an electric water pump. i have no clue what pulleys to buy. every thing i found has a water pump pulley. what is it i need to buy, what are they called?

[Hank70SS]

I would stick with the stock double pulley on the crank. Then it's just a matter of finding the correct length belt for alternator. The power steering belt would remain the same.

[136ED]

will the alternator from a 307 work on a 350 as well? will the power steering belt work on the new motor also?

[Rattler]

With an electric water pump you will need to mount your alternator low to make it work. What accessories are you running off the motor?

[136ED]

well I have an electric water pump and I'm getting an electric fan so I guess just the power steering and the alternator. I'm not really sure. This is the first time I'm doing all this stuff.this is my first project.

[Rattler]

I ended up using a low driver side alternator mount and just flipped it to use it on the passenger side. I'm running an electric fuel pump so I had the room. With a mechanical fuel pump I don't believe it would work. I'm not sure what groove the power steering rides on in your car. Does everything ride on a single belt or does the steering have a separate belt? You may be better off just removing the electric pump and installing a normal water pump. Especially if this is going to be a daily driver type vehicle.

Here's a pic of mine down low on the passenger side.
http://www.allenitllc.com/hotrods/chevelle/engine/alternator%20003.jpg