i so badly want to hear my chevelle running!

[SS Shaun]

but i am scared to death of hearing this 454 start because i might fall in love with it..lol well the reason why i am posting is because i am to the point where all i need to do is wire it, put oil in it get some gas to the fuel pump and then to the carb, lower rad hose and coolant. so i think! I know i am missing some stuff but i just dont know what i am missing. i am going to post up some pictures now and some when i get home so i can have people chime in on what i am missing and what i need to get
so what does it look like i am missing here?
http://i114.photobucket.com/albums/n271/civiclxb16a/chevelle/IMG_5541-1.jpg

http://i114.photobucket.com/albums/n271/civiclxb16a/chevelle/IMG_5688.jpg

doesnt the carb get a spring? and a bracket that holds the throttle cable right? does the spring mount on that for the carb to return to closed status? i am looking for new valve covers and hard ware and i want some kind of wire loom to hold it in a neater manner any ideas?

[fleming23]

Based on the look of your motor I would probably get some cheater valve covers in the original style and use the built in wire looms which attach directly to the valve cover.
http://www.ss396.com/mm5/graphics/00000009/ALS-1165XT.jpg

Originally there was a bracket that mounted to the intake for the carb return spring as seen below by the orange triangular shaped piece with a hole in the middle
http://www.chevyhardcore.com/wp-content/blogs.dir/28/files/2011/07/1970ChevelleLS6-4.jpg

Today you can find quite a few variations with the return spring built in. My favorite and the one I use on my motor is the Holley bracket (summit & jegs make their own which are less expensive).
https://encrypted-tbn3.google.com/images?q=tbn:ANd9GcRRkz7nd3EIib47KELgqRz88h2H7Brkl cpezY7ub5TE9b9zinMvBQ

[SS Shaun]

great info! thanks a lot i am going to look up that spring return now!

[RBeckman]

Is it me or is that Carb at a angle?

[SS Shaun]

it is thats the design of the intake. i am thinking about replacing it

[SS Shaun]

http://i114.photobucket.com/albums/n271/civiclxb16a/chevelle/IMG_5000.jpg

see

[fleming23]

I thought the same thing Ric. I think with the carb at that angle you are going to create more problems than anything else (Throttle & trans cable binding, throttle return spring mounting location, possible fuel line to alternator clearance issues)

[flash]

Why did they do that ?

[RBeckman]

I thought the same thing Ric. I think with the carb at that angle you are going to create more problems than anything else (Throttle & trans cable binding, throttle return spring mounting location, possible fuel line to alternator clearance issues)

I agree, there are enough issues without all that added stuff. I'd be changing it as well.

[RBeckman]

I thought the same thing Ric. I think with the carb at that angle you are going to create more problems than anything else (Throttle & trans cable binding, throttle return spring mounting location, possible fuel line to alternator clearance issues)

I agree, there are enough issues without all that added stuff. I'd be changing it as well.