Chevrolet Chevelle Forums

Chevrolet Chevelle Forums (http://chevelleforum.net/index.php)
-   Chevelle Gallery (http://chevelleforum.net/forumdisplay.php?f=19)
-   -   Lets see some engine & underhood shots (http://chevelleforum.net/showthread.php?t=3423)

ProStreet67 02-26-2013 08:26 AM

Lets see some engine & underhood shots
 
5 Attachment(s)
Post up some pics of your engine and underhood shots, provide some specs too !

A few pics of mine.....

Specs:
863 Horse Power, 800 plus ft lbs tq- All Motor, No Nitrous.
632 Cubic Inch Merlin III Tall Deck Block
Merlin III 350cc Aluminum Heads w/ 2.30 Intakes, 1.94 Exhaust Valves
10.5:1 Compression ( Run 50/50 mix of 93 & Cam 2 Race Fuel, just to be safe)
Solid Roller .700 plus lift
Merlin Intake
1150 Dominator Carb
Mallory HEI Distributor w/ MSD 6AL Box
Hooker Super Comp Headers ( soon to be Lemons Headers for better f it/finish )
3" exhaust with flowmaster original 40 series mufflers w/ turn downs ( going to 3.5" with new sgl chamber Flowmaster race mufflers )

Putting The Power To The Pavement:
400 Turbo- Full Comp Trans, Manual Valve Body, Trans Brake, External Cooler
3500 Converter
4 Link, w/ 9" Rear, Moser Axels, 4:11's
33x21.50x15 Mickey Thompsons on Weld Drag Lites.

earthquake68 02-26-2013 09:14 AM

Ok, I'll play. Mine's not as violent as yours, but it should be pretty peppy for street driving.

http://i129.photobucket.com/albums/p...psd0a2685d.jpg

http://i129.photobucket.com/albums/p...psdab2247a.jpg

It's a 327 with:

12:1 forged pistons
steel crank
H-beam rods
aluminum heads
roller rockers
Holley street dominator manifold
700 CFM Holley

Trans is a TH350 with a shift kit and 4,000 stall.

Rear is a stock 10 bolt for now because I haven't built that part yet. :D

ProStreet67 02-26-2013 10:04 AM

NICE !!! The heartbeat on the firewall is a real nice touch. Verly Clean setup ! Looks great !

flash 02-26-2013 11:14 AM

Very nice on both ya'lls engines .

earthquake68 02-26-2013 12:13 PM

Thank you! This is the tribute I'm doing for the car I had in high school. I want it to be as close as I can possibly get it. (Except a little faster since I have more money these days. :D)

bad68 05-19-2013 07:00 AM

My 468
 
http://i35.photobucket.com/albums/d1...8Nova_/468.jpg

Aluminum Rect Head 468 11:1 Comp. Big Solid Roller Team G Intake 750 Holley TH400 with a brake and 4000 stall 12 Bolt 4:10's

flash 05-19-2013 09:04 AM

Nice !!!!!!!!!!!!!!!!!!!!!!!!!!!.

shadowgray396 05-19-2013 11:06 AM

Some very nice engines in this section

SS Shaun 05-20-2013 08:44 AM

my 454 in the chevelle as of right now

http://i114.photobucket.com/albums/n...ps37be638f.jpg

and in the camaro
http://i114.photobucket.com/albums/n...-14-09_970.jpg

i went from this in my rx7
http://i114.photobucket.com/albums/n...n/DSC01615.jpg
to this
http://i114.photobucket.com/albums/n...rsion/MyFC.jpg

Ms Grumpy 05-20-2013 06:48 PM

I know mine is posted somewhere in a thread. As soon as I get some sleep I will be doing some copy and pasting. :)


All times are GMT -5. The time now is 03:09 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Audiokarma.org