View Single Post
  #1  
Old 03-25-2017, 10:43 AM
glinder46 glinder46 is offline
Junior Member
 
Join Date: Aug 2016
Posts: 4
Default 70 SS454 Fan Shroud Problem w/DeWitt AL Radiator

I had some mods done to my 454 including Vintage A/C which gave me a heating problem. I ended up solving it with a DeWitts Aluminum Radiator. Great choice but i have some issues with the fan shroud not fitting properly. The 70 uses three top mounting bolts and two clips on the bottom. I used DeWitts insulators top and bottom. If I mount the top bolts up high for fan clearance the bottom clips won't engage (too short) If I push the shroud down 1/4 in the center bolt hole is too far down to engage the top radiator surround. Any suggestions would be appreciated. I could buy an original GM shroud but it is 3x the amount of an aftermarket.

Thanks,

George Linder
Reply With Quote