Thread: Wiring Harness
View Single Post
  #3  
Old 02-16-2013, 08:22 AM
Hank70SS's Avatar
Hank70SS Hank70SS is offline
Moderator
 
Join Date: Dec 2009
Location: Brighton, MI
Posts: 4,719
Default

1. picture 2295 is the harness across the core support to the pass front. green and yellow are headlights, if purple is turn signal, what is the blue for? Both the blue and purple got to the parking light/turn signal.

2. picture 2296 the cut brown wire on the driver side harness from the firewall. Is this what is called the forward light harness, can't tell from the pic? It would run from firewall over inner fender up to horn relay, headlights etc. If so the brown wire may run to the voltage regulator.

3. picture 2298 this harness is a mess.. the only one i know is the fan motor there are 3 wires im not sure of a purple, black with a purple stripe... and a blue Purple wire may go to starter solenoid. Blue, oil pressure switch? Black with purple stripe, not sure. We are talking about engine harness, right?

Would also like help in wiring it with no voltage regulator since this will be built in the alternator.
do you have a diagram i could follow for wiring this properly with what i am using This may have been done already since the brown wire to the external voltage regulator has already been cut. Can you trace back the 2 wires going to the alt?
__________________
Hank

70 Chevelle SS396(454), M20, 3.73
My Chevelle
Reply With Quote