#1
|
||||
|
||||
Is this carb worth rebuilding?
A buddy of mine gave me this carb today. Is it worth rebuilding or should I just get a new one? From what I can tell from looking up some of the numbers it's 750 dual fed 4160. All the linkages seem tight and not wore out. For the most part it's the same carb I ran on my motor few weeks ago so I know this style should idle and run fine.
__________________
Justin Projects: 70 Chevelle Malibu http://s132.photobucket.com/user/qua.../70%20Chevelle |
#2
|
|||
|
|||
Looks like an older 3310, 750 cfm. They work good, I would jet it down for your 350.
__________________
1972 SS 454 Chevelle LS5/M21/12 bolt 3.73 posi 1969 Malibu COPO L72/M20/12 bolt 3.31 posi 1968 Malibu LQ9/4L80E/12 bolt 3.73 posi |
#3
|
|||
|
|||
Clean it up real good, throw a kit in it...and go for it.
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD |
#4
|
||||
|
||||
Well I took it apart and now I've got it soaking in the parts washer at work. I ordered the rebuild kit and the power valve blowout protection kit from jegs last night and I live close enough that I almost always get my parts next day. Has anyone ran that Percy's adjust a jet? Been thinking about giving that a try? Hopefully by the end of the weekend I'll have it fired up and running
__________________
Justin Projects: 70 Chevelle Malibu http://s132.photobucket.com/user/qua.../70%20Chevelle |
Thread Tools | |
Display Modes | |
|
|