#1
|
|||
|
|||
another fuel gauge issue
first post for me, put in new gauge on a '69, and new sending unit. Fuel gauge reads below empty, When i disconnect sending wire in trunk, gauge go's to like 1/4 full only. when i ground the wire, it go's to way past empty. Anyone have any ideas? thanks
|
#2
|
||||
|
||||
Is the ground wire good not dirty?
|
#3
|
|||
|
|||
yes, tank and ground wire are new. just did an ohm check from ground wire to connector in trunk. only got a reading of 1.4 with 4 gals of gas, thinking it should have been like 18? i saw some posts where the sending unit is grounding out internally even though brand new?
|
#4
|
||||
|
||||
At empty it read around 2 ohms, half full at 40, and full around 80 to 84 ohms. Did you do a ohms check of the sending unit before you put it on? Also if you do a search on here on fuel gauge there several right up about it
__________________
Ray 1970 SS Chevelle Van Nuys Built |
#5
|
||||
|
||||
Quote:
|
|
|