ChevelleForum.net

Go Back   Chevrolet Chevelle Forums > Chevrolet Chevelle Garage > Electrical

Reply
 
Thread Tools Display Modes
  #1  
Old 09-09-2010, 11:28 PM
brent brent is offline
Junior Member
 
Join Date: Aug 2010
Posts: 3
Default power top wiring

i have a 67 rag top project i need to know how to wire the power to the top switch
Reply With Quote
  #2  
Old 09-13-2010, 11:24 AM
dbradley dbradley is offline
Member
 
Join Date: Dec 2009
Location: Sapulpa, OK
Posts: 51
Default

Seems this has set for a while...... I know that on my '69 there was a 10awg wire that connected to the starter (same post as + batt cable). Ran up to a breaker mounted near the master cylinder. I 'think' it was a 30A breaker. Wire went from breaker to common post on top switch. Rear harness connected UP and DOWN between switch and motor/pump.

One source is American Autowire p/n 04850166 sold by many vendors.

Last edited by dbradley; 09-13-2010 at 11:30 AM.
Reply With Quote
  #3  
Old 09-14-2010, 06:53 AM
Czeto Czeto is offline
Junior Member
 
Join Date: Jan 2010
Location: Santa Fe, NM
Posts: 15
Default

On a 68 the power wire goes from the horn relay power tap along the driver fender wire harness to the 30 amp breaker mounted above the brake cylinder then through a firewall hole to the switch.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:48 AM.



Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Audiokarma.org