#1
|
|||
|
|||
Good alignment shop in PA and specs
front end is getting done this weekend. Need good alignment shop with 50 miles of Phila.
Someone told me good alignment shops are hard to find today...and find one with new equipment. tube upper/lower control arms new springs maybe lower an inch 1" rear sway bar 1 3/8" hollow front sway bar 245/60 - 15's all 4 saw these specs some where here. is this what i should shoot for? *Street Performance* Camber: -1/2 degrees Caster: +5 to +5.5 degrees Toe in: 1/16" total thx |
#2
|
|||
|
|||
I would find an old timer with good old equipment ,new not always better .
__________________
John |
#3
|
|||
|
|||
the guy at sears in east stroudsburg does a dam good job on doing alignments
__________________
2005 dodge magnum daily driver 1988 mazda rx7 LS6 swap 1969 SS work in progress |
#4
|
|||
|
|||
ya john you may be right....
Thanks SShaun i will keep him as a back up... |
Thread Tools | |
Display Modes | |
|
|