#1
|
|||
|
|||
68 Chevelle Coil Springs
I have a 68 Chevelle with sagging rear coil springs and want to change them. Any recommendations on what to replace them with? I would like to replace the front and the rear. I thought of getting heavy duty springs to give it a slight lift? I know this would give me a rougher ride! There seems to be alot of spring choices out there any ideas?
|
#2
|
|||
|
|||
Here is the Moog part number for front oem options, with spring rates, loads and install heights.
|
#3
|
|||
|
|||
Thanks for the information on the springs I appreciate it!
|
#4
|
||||
|
||||
Great graph Bull.
__________________
Get in, sit down, shut up, hold on...cause Ms Grumpy is driving ! For the audio geek try: www.audiokarma.org |
#5
|
|||
|
|||
your welcome and thanks.
i really wanted to go with that 8602 spring. but the total diameter scared me as it is a lil less wide. free height was low and wasn't sure how that would go either. 400/424lbs is where i wanted to be, with stock being at 318 and all these after market performance springs being 500+ something right in the middle was my thought. i decided to go with the 5380 and see what a new spring gets me. i can always cut it a little later to get a 1/2" to 1" drop which will also give me an increased spring rate. got some QA1 adjustable shocks for all corners as well. bit more then i wanted to spend but i have a disease calls chevelleitis |
Thread Tools | |
Display Modes | |
|
|