#1
|
|||
|
|||
I hate RTV!!
Changed the trans fluid and filter this morning and I guess the previous owner loved RTV. There was no gasket on the trans pan, just a ton of gasket maker gooped all over the place. Would have taken me half the time to do the job, but had to scrap all that crap off!! Just venting a little, oh and the previous owner did the same thing on the water housing when I changed the thermostat, no gasket just a ton of RTV. Why can't people just do things the right way??!!
__________________
-Billy 1970 Chevelle 307, powerglide, ps, and a/c |
#2
|
|||
|
|||
Usually the rearend doesnt have a gasket either I use silicone sealer in a caulking tube ... have had no problems on either.
|
#3
|
||||
|
||||
You'd hate me...in some places I use both.
|
#4
|
||||
|
||||
That's all they use on many parts in newer cars, no gaskets just RTV.
|
#5
|
|||
|
|||
I use both also, but not to the point that the RTV is oozing out the sides of what I'm putting back together.
__________________
-Billy 1970 Chevelle 307, powerglide, ps, and a/c |
|
|