ChevelleForum.net

Go Back   Chevrolet Chevelle Forums > Chevrolet Chevelle Garage > Chevelle Maintenance

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-25-2017, 10:43 AM
glinder46 glinder46 is offline
Junior Member
 
Join Date: Aug 2016
Posts: 4
Default 70 SS454 Fan Shroud Problem w/DeWitt AL Radiator

I had some mods done to my 454 including Vintage A/C which gave me a heating problem. I ended up solving it with a DeWitts Aluminum Radiator. Great choice but i have some issues with the fan shroud not fitting properly. The 70 uses three top mounting bolts and two clips on the bottom. I used DeWitts insulators top and bottom. If I mount the top bolts up high for fan clearance the bottom clips won't engage (too short) If I push the shroud down 1/4 in the center bolt hole is too far down to engage the top radiator surround. Any suggestions would be appreciated. I could buy an original GM shroud but it is 3x the amount of an aftermarket.

Thanks,

George Linder
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:47 PM.



Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Audiokarma.org