#1
|
||||
|
||||
1971 Chevelle inner fenders - plasitic or steel?
I bought my car with NO front end. This is my 1st Chevelle.
What I am wondering... Plastic or metal inner fenders? I see both are listed. Could use some help... my car won't ever be original again. I just want a great driver....
__________________
1971 Malibu (thinking SS clone) (396/402 w/auto, 12 bolt posi, cowl induction) Havana, IL Last edited by BobKnake; 08-05-2014 at 08:05 PM. |
#2
|
||||
|
||||
I bought plastic ones for mine. I figured I would never have to worry about painting them or them ever rusting again plus they would be a bit more forgiving during the install. I haven't made it that far in my build yet but a cutlass I had, had them from the factory.
__________________
Justin Projects: 70 Chevelle Malibu http://s132.photobucket.com/user/qua.../70%20Chevelle |
#3
|
||||
|
||||
cool, thanks...
I looked at a 71 more-door the other day... it had plastic. seems strange they have both available. Thanks Again
__________________
1971 Malibu (thinking SS clone) (396/402 w/auto, 12 bolt posi, cowl induction) Havana, IL |
#4
|
|||
|
|||
Some came with one of each from what I have read ,I have had both .I prefer metal for mine but no real reason .
__________________
John |
#5
|
||||
|
||||
Quote:
i don't think it's going to matter to me. I was just curious. but 1 of each... that seems strange.
__________________
1971 Malibu (thinking SS clone) (396/402 w/auto, 12 bolt posi, cowl induction) Havana, IL |
#6
|
|||
|
|||
I had always thought that plastic was an early 70s thing. Then I bought my 69' this past February, it has original plastic inner fenders.
The plastic inner fenders I have in my 72' fit horrible. Supposedly the AMD & Parts Place inner fenders fit nice. But, they are more costly than a set of reproduction steel inner fender panels.
__________________
1972 SS 454 Chevelle LS5/M21/12 bolt 3.73 posi 1969 Malibu COPO L72/M20/12 bolt 3.31 posi 1968 Malibu LQ9/4L80E/12 bolt 3.73 posi |
#7
|
||||
|
||||
All the ones I have seen crack at some point. I went with metal on mine. I had a 70 that had one plastic and one metal.
__________________
Ray 1970 SS Chevelle Van Nuys Built |
#8
|
||||
|
||||
I like the metal to. It adds structural support to the doghouse. When I did my bodywork I had them out. Fenders flopping around. Once they are bolted in it needed reblocked and the front end is a brick now. Those fenders are not moving.
|
#9
|
||||
|
||||
When I bought my car it was in pieces. The inners were rusted out so replaced them with metal ones. Fit was good and I'm not going to be driving it in the snow and salt so I wasn't worried about them rusting and 10 years later they haven't.
|
#10
|
||||
|
||||
Plastic here also.
__________________
Get in, sit down, shut up, hold on...cause Ms Grumpy is driving ! For the audio geek try: www.audiokarma.org |
|
|