|
#1
|
||||
|
||||
Help with my build
Hey all. Brand new around here and wanted to get some opinions on my build I'm doing. I have a 454 that will be bored .030 and I bought some closed chamber heads. I'm goin to put some bigger valves in the heads. I already have my cam which is a Lunati Voodoo hyd. roller which has advertised duration of 282/290, .600/.600 lift it calls for a 2500 stall and 9.75:1 compression.
So what type of pistons would you run on this? And what intake? |
#2
|
|||
|
|||
Pistons, depends on combustion chamber size. A small, less than 100cc head - flat tops. 118cc + heads - dome, around an 1/8 inch. Intake - high rise, dual plane. Edelbrock Performer RPM or something similar.
What is the duration of that cam @ .050" ?
__________________
1972 SS 454 Chevelle LS5/M21/12 bolt 3.73 posi 1969 Malibu COPO L72/M20/12 bolt 3.31 posi 1968 Malibu LQ9/4L80E/12 bolt 3.73 posi |
#3
|
|||
|
|||
I am not good with determining what parts will work together in the motor but I would talk to a machine shop if anybody knows they would.
Sent from my DROID BIONIC using Tapatalk 2 |
|
|