#1
|
||||
|
||||
Lets see some engine & underhood shots
Post up some pics of your engine and underhood shots, provide some specs too !
A few pics of mine..... Specs: 863 Horse Power, 800 plus ft lbs tq- All Motor, No Nitrous. 632 Cubic Inch Merlin III Tall Deck Block Merlin III 350cc Aluminum Heads w/ 2.30 Intakes, 1.94 Exhaust Valves 10.5:1 Compression ( Run 50/50 mix of 93 & Cam 2 Race Fuel, just to be safe) Solid Roller .700 plus lift Merlin Intake 1150 Dominator Carb Mallory HEI Distributor w/ MSD 6AL Box Hooker Super Comp Headers ( soon to be Lemons Headers for better f it/finish ) 3" exhaust with flowmaster original 40 series mufflers w/ turn downs ( going to 3.5" with new sgl chamber Flowmaster race mufflers ) Putting The Power To The Pavement: 400 Turbo- Full Comp Trans, Manual Valve Body, Trans Brake, External Cooler 3500 Converter 4 Link, w/ 9" Rear, Moser Axels, 4:11's 33x21.50x15 Mickey Thompsons on Weld Drag Lites.
__________________
67 SS Chevelle Pro Street 632 Engine- 863hp, Dominator, MSD, Flowmasters 33x21.50x15 MT's On Welds |
#2
|
||||
|
||||
Ok, I'll play. Mine's not as violent as yours, but it should be pretty peppy for street driving.
It's a 327 with: 12:1 forged pistons steel crank H-beam rods aluminum heads roller rockers Holley street dominator manifold 700 CFM Holley Trans is a TH350 with a shift kit and 4,000 stall. Rear is a stock 10 bolt for now because I haven't built that part yet.
__________________
Alan 1964 Chevelle SS Speed's expensive, how fast do you want to go? |
#3
|
||||
|
||||
NICE !!! The heartbeat on the firewall is a real nice touch. Verly Clean setup ! Looks great !
__________________
67 SS Chevelle Pro Street 632 Engine- 863hp, Dominator, MSD, Flowmasters 33x21.50x15 MT's On Welds |
#4
|
|||
|
|||
Very nice on both ya'lls engines .
__________________
John |
#5
|
||||
|
||||
Thank you! This is the tribute I'm doing for the car I had in high school. I want it to be as close as I can possibly get it. (Except a little faster since I have more money these days. )
__________________
Alan 1964 Chevelle SS Speed's expensive, how fast do you want to go? |
#6
|
||||
|
||||
My 468
Aluminum Rect Head 468 11:1 Comp. Big Solid Roller Team G Intake 750 Holley TH400 with a brake and 4000 stall 12 Bolt 4:10's
__________________
http://s35.photobucket.com/albums/d180/Bad68Nova_/ |
#7
|
|||
|
|||
Nice !!!!!!!!!!!!!!!!!!!!!!!!!!!.
__________________
John |
#8
|
||||
|
||||
Some very nice engines in this section
__________________
Ray 1970 SS Chevelle Van Nuys Built |
#9
|
|||
|
|||
__________________
2005 dodge magnum daily driver 1988 mazda rx7 LS6 swap 1969 SS work in progress |
#10
|
||||
|
||||
I know mine is posted somewhere in a thread. As soon as I get some sleep I will be doing some copy and pasting.
__________________
Get in, sit down, shut up, hold on...cause Ms Grumpy is driving ! For the audio geek try: www.audiokarma.org |
|
|