http://img.tapatalk.com/d/13/03/10/ypegader.jpghttp://img.tapatalk.com/d/13/03/10/e7uhyhez.jpghttp://img.tapatalk.com/d/13/03/10/4u6e2y4y.jpgMy first Saturday with the car back. Got the new a/c condenser and radiator installed. Not nearly as much as I wanted to get done. Spent most of the day trying to hunt down new rubber isolators to mount the condenser. Then I came across the new ones in the box! Then had to chase down the proper top radiator hose.
I really need a photo of how the trans cooling lines are routed around/ over the engine cradle??photos??
Would anybody by chance have there interior door panel off? And can take some pictures of the top edge inside? Looking for the placement of a couple of parts left over.


Sent from my iPhone using Tapatalk

There is a clip under one of the oil pan bolts. They tuck up against the pan rail and go over the crossmember. They bend towards the frame rail just before the fuel pump.

HTH

Looks good. Which parts do you have left over on the door?. Might be able to tell you where they go. I had a picture let me see if I can find it for you.

Here ya go! See what yall can help me with, Please!
Photo 1&2 part(s) A
Attachment 2576
Attachment 2577
Photo 3&4
Attachment 2578
Attachment 2579
Photo 5Attachment 2580


Sent from my iPhone using Tapatalk

Photo 6
Attachment 2581
Photo 7
Attachment 2582
Photo 8
Attachment 2583
Photo 9
Attachment 2584
Photo 10
Attachment 2585
Various parts that need a home


Sent from my iPhone using Tapatalk

Looks like the parts that hold your windows in place and keep them from rattling .

Exactly. Now if you could take a picture of your door so I can see Were on the doors.
What about 8-10?


Sent from my iPhone using Tapatalk

#8 appears to be the outer window felts.

Here some info for you

http://chevelleforum.org/picture.php...pictureid=3288

http://chevelleforum.org/picture.php...pictureid=3285

Photo 7 is the same bracket as the upper part of photo 5, just rusted more.

Photo 6 and 9 not sure, do not remember seeing them before.

Your window pads or guides shown in photo 1 go on the front and rear part of the outer door. There should be holes for them to screw onto already in your doors. They go under the window felts so you have to install them first.
http://chevelleforum.org/picture.php...pictureid=3293

http://chevelleforum.org/picture.php...pictureid=3294

If I need to I can put some of the hardware back on this door and take a few more pic's.

:ntwrthy: Great reference photos Ray.