Chevrolet Chevelle Forums

Chevrolet Chevelle Forums (http://chevelleforum.net/index.php)
-   Chevelle Gallery (http://chevelleforum.net/forumdisplay.php?f=19)
-   -   72 Driver NorthCarolina UNDER CONSTRUCTION (http://chevelleforum.net/showthread.php?t=1158)

smokenjoep01 02-16-2014 10:06 AM

Gonna crawl in there with a flash light. And have my buddy lock me in and hit it with the hose.


Sent from my iPhone using Tapatalk

shadowgray396 02-16-2014 03:26 PM

That's the only way you will find it. Could be a seal, but I'm guessing you have a pin hole somewhere around the lower corner of your window.

flash 02-16-2014 05:54 PM

Your trunk gasket could also be in upside down .

smokenjoep01 02-16-2014 09:42 PM

Upside down?


Sent from my iPhone using Tapatalk

flash 02-16-2014 10:00 PM

It will fit either way but if its upside down it will leak .If I remember correctly the fatter side goes down .

shadowgray396 02-16-2014 10:33 PM

Should be like the one on my 70, it will only go on one way. It has a groove in it that slips under the lip of the trunk to keep it in place. I didn't even have to glue mine to keep it in place.

smokenjoep01 02-17-2014 07:30 AM

Mine has a groove that slides over the rib around the trunck.
Day off on Mondays! And its sunny and warm.
Gonna play with it some more today


Sent from my iPhone using Tapatalk

smokenjoep01 02-17-2014 07:17 PM

Decided to cruise down to Myrtle beach and do a little shakedown. About 75 miles one way. Plus we cruised around quite a bit down there. Nice and sunny in high 50's. Car ran great!
I put Hush Matt in Sunday night. Had enough to do the roof, floor and kick panel areas. Well worth the money spent on the matt.
Sunday during the day I installed new fuel tank/ sender and the nitrous bottle.
http://img.tapatalk.com/d/14/02/18/2utyvu3e.jpghttp://img.tapatalk.com/d/14/02/18/3e7uhyhy.jpghttp://img.tapatalk.com/d/14/02/18/u6e3uzyq.jpghttp://img.tapatalk.com/d/14/02/18/upa6asad.jpghttp://img.tapatalk.com/d/14/02/18/yda2u4e7.jpg


Sent from my iPhone using Tapatalk

Quadracer392 02-17-2014 08:41 PM

How much of a difference did the hush mat make? Was it pretty easy to form to the floor?New tank and bottle look nice too!

smokenjoep01 02-17-2014 08:47 PM

Hush matt was a breeze to install. I suggest a small wooden hand roller to really get it pressed in good. I wore my fingers out;)
I will be buying more to do the entire car. Well worth it. Very noticeable difference.


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 04:01 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Audiokarma.org