Chevrolet Chevelle Forums

Chevrolet Chevelle Forums (http://chevelleforum.net/index.php)
-   Chevelle General Talk (http://chevelleforum.net/forumdisplay.php?f=18)
-   -   What Did You Do To Your Chevelle Today (http://chevelleforum.net/showthread.php?t=2138)

shadowgray396 08-17-2012 11:16 PM

Glad you got to use it in the parade, my car has just sat in garage all week while I have been gone.

Ms Grumpy 08-18-2012 08:07 PM

Thanks Ray.

I probably over did it, but I took my car to the Woodward Dream Cruise today. I really ticked off a guy who was parked beside me. He asked me if I would move my car so that he could park in the "better" parking spot. He had his car for sale and he said he didn't beat me to the spot. How could he beat me ? All the spots were numbered and mine was #1, right on the end.

I told him that I was having trans problems and that I would prefer not to. He got mad and tried to tell me that he could fix my trans problem. I was not letting this guy near my car. Anyway, he ended up sweet talking someone and parked his car so that it was blocking mine from anyone seeing it on Woodward. But it ended up backfiring on him. I guess all week he had the car listed for $15k, and people had seen it, well now it was listed for $13k and people were not being nice when they were talking about it. But they were checking out my car and saying some pretty nice things about it. One guy even asked him why he parked his "hunk of junk in front of my beautiful car"..ouch. Needless to say it was an interesting day.

69chevelless 08-18-2012 10:43 PM

Haha good story Nancy!

fleming23 08-20-2012 12:18 PM

Started a project over the weekend.

Man you can destroy a perfectly decent car in about an hours time!

http://i375.photobucket.com/albums/o...g?t=1345427448

Good news is I found a partial reason why my heater/AC air flow was so horrible

Plastic piece that secures to the air flow direction door was broken and not allowing the door to move as it should. This allowed air to leak out of all the vents rather than directing it to the correct duct. Hoping I will actually have A/C that blows hard enough to cool me down now (fingers crossed!)

http://i375.photobucket.com/albums/o...g?t=1345384482

If all goes as planned I should be able to start putting the new gauges & dash back in this evening after work!

Jimmy 08-20-2012 03:00 PM

i changed my oil and filter. found out the antifreeze plug (sorry i donīt know the english word) above the starter is leaking.:mad:

fleming23 08-20-2012 09:33 PM

Made some progress on the gauge install today.

Still have a rat's nest of wiring behind the dash that needs straightened out and none of the sensors have been installed but the gauges are in and I would say 1/2 to 3/4 of the battle is over.

I know these will not appeal to everyone but I am actually quite pleased with the appearance and welcome all the added functionality that the factory gauges lacked!

Getting everything laid out and ready to start cutting/wiring.
http://i375.photobucket.com/albums/o...g?t=1345516399

Easily one of the best bang for the buck investments made!

Laminated, color wiring diagram!
http://i375.photobucket.com/albums/o...g?t=1345516403

Almost done wiring
http://i375.photobucket.com/albums/o...g?t=1345516364

Rock & Roll!
http://i375.photobucket.com/albums/o...g?t=1345516391

http://i375.photobucket.com/albums/o...g?t=1345516395

http://i375.photobucket.com/albums/o...g?t=1345516386

flash 08-20-2012 10:14 PM

We took our youngest foster boy cruisin in the vert this afternoon and he had a blast.

SS Shaun 08-21-2012 07:36 AM

i had a dream that i was driving mine :(

shadowgray396 08-21-2012 08:11 AM

Quote:

Originally Posted by fleming23 (Post 37777)
Made some progress on the gauge install today.

Still have a rat's nest of wiring behind the dash that needs straightened out and none of the sensors have been installed but the gauges are in and I would say 1/2 to 3/4 of the battle is over.

I know these will not appeal to everyone but I am actually quite pleased with the appearance and welcome all the added functionality that the factory gauges lacked!

Getting everything laid out and ready to start cutting/wiring.
http://i375.photobucket.com/albums/o...g?t=1345516399

Easily one of the best bang for the buck investments made!

Laminated, color wiring diagram!
http://i375.photobucket.com/albums/o...g?t=1345516403

Almost done wiring
http://i375.photobucket.com/albums/o...g?t=1345516364

Rock & Roll!
http://i375.photobucket.com/albums/o...g?t=1345516391

http://i375.photobucket.com/albums/o...g?t=1345516395

http://i375.photobucket.com/albums/o...g?t=1345516386



I like the look. What brand are your gauges?

fleming23 08-21-2012 08:39 AM

Dakota Digital VHX Series


All times are GMT -5. The time now is 09:24 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Audiokarma.org