I installed one in my "67 Camino; if you need any help let me know. Here are some good things to know that will come in handy and just remember to take your time and do only one Circuit at a time. If you need some pictures let me know.
Four terminal dash ignition switch connections with a universal harness.
Connect the pink and orange wires together at the "IGNITION" terminal on the switch.
Connect the two red wires together at the "BAT" terminal.
Connect the purple wire to the "START" terminal.
Connect the brown wire to the "ACCESSORY" terminal.
And if you have a problem here is there website and I think they have an updated manual for most kits. http://www.painlesswiring.com/faq.php
__________________
Robert. A cool wife who understands is a wonderful thing! 67 Elky Global West suspension kit with coil over QA1's,435hp Edy Crate,700R4, Currie +9 3:75, Disc brakes front and rear, Dakota Digital gauge package, 12 circuit Painless wiring kit, Ididit tilt Colum, etc.
Last edited by rak1; 03-01-2010 at 10:03 AM.
|