|
|
|
#1
09-26-2013, 02:38 PM
|
||||
|
||||
Alumitech Automatic Radiator - Local pick up only
I imagine most of you frequent both forums, but for those who don't....
I pulled the Alumitech out of my car tonight. Nothing wrong with it other than the normal wear & tear. Has the internal automatic transmission cooler or you can just leave it unused as I have been doing. Lots of local guys who travel to many of the regional shows so maybe you can talk to Billscamino or Flash about picking it up and carrying it to you, if they are willing to do so. $200 picked up, firm. I also have flex-a-lite dual fans & FAL variable speed controller that I have been using but am changing for a complete DeWitt's combo. $150 additional for fans so $350 total. Some issues I will mention with the fans, but they work just fine. Had to clearance the passenger side fan a little. I don't remember what the radiator cost new but I think it was around $500 (for reference, a Dewitt natural/auto radiator is $525 + shipping) and the Flex A Lite fans & controller were around $500 so in total this was a $1000+ combo. Here is a photo of both sides of the radiator.  
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA 
|
|
#2
09-27-2013, 06:57 AM
|
|||
|
|||
|
Tempting...
But I have no idea what I'd use it for??
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD
|
|
#3
09-27-2013, 07:31 AM
|
||||
|
||||
|
Quote:
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA
|
|
#4
10-14-2013, 09:29 AM
|
|||
|
|||
|
Still available? Radiator only...
|
|
#6
10-14-2013, 10:45 AM
|
|||
|
|||
|
Yeah...save it for me. Looks like my wagon's going big block with A/C this winter.
 Can't leave things alone...I'm like you but on a MUCH smaller scale.   I leave for FL on Thursday AM...we're doing a week long Caribbean cruise out of Miami on Saturday afternoon so I won't probably see 'ya before I return. I can Paypal you now if necessary. Headed out to Greg's work in Cumming right now to pick up a small block he's machined for me.
|
|
#7
10-14-2013, 10:57 AM
|
||||
|
||||
|
Paypal is not necessary.... It is here whenever you want/need it.
My next question was going to be what you were going to do with it! Guess that is good! Remember, my "project" began life looking like this.... It has been quite a few projects to get to the point it sits today! I should have sold it a long time ago!!!  Also, I have/had an A/C compressor that came off my car when I replaced with the Pro6Ten and couple of extra big block brackets sitting around Mo's somewhere if you want them (assuming they are still there!) Not sure if you are doing a complete kit or something flashy but I can look this weekend if you are interested. Free. I was going to use the compressor on my ramp truck but don't think it is worth the hassle or expense.
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA Last edited by fleming23; 10-14-2013 at 11:00 AM.
|
|
#8
10-14-2013, 02:07 PM
|
|||
|
|||
|
Awesome!!!
I'm trying to do a "Stock" as possible look!!!!!!! Kind of a COPO LS-3 wagon. If they're still at Mo's, I take whatever ya got. I'll get with you after we return from FL. I'd be happy to drop a check in the mail to you if you want. PM me your mailing address...
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD
|
 |
|
|
Linear Mode
