I need a bunch of 70 stuff!!!!

grandsport · #1 09-18-2010, 09:37 PM

Correct Qjet carb for a 396 automatic
Correct intake
Master cylinder,casting # 409 bb
Acorrect oil pan
Original rear window mouldings.
Build date is April 70.

I'm not looking to steal these parts,as I will pay up but I don't want to get ripped off either.

flash · #2 09-19-2010, 07:06 PM

Good luck with your search for parts ,if I could help you know I would. Hinshaws in North Carolina might have some of it ,James has quite a stash of original parts.

grumpy · #3 09-19-2010, 07:57 PM

Gary,

I heard a lot of great things about this guy down in Texas http://motors.shop.ebay.com/brunte69...1&_from=&_ipg=

Or you may be able to find a local shop who can polish your trim like we did. It was spotless when we got it back. They usually charge about 10 bucks a foot to polish it.

Highway Star · #4 09-20-2010, 08:22 AM

Have you contacted SMI about your carb, Gary?

RBeckman · #5 09-20-2010, 10:20 AM

Quote:

Originally Posted by Highway Star

Have you contacted SMI about your carb, Gary?

I had SMI build a Q-Jet for me last year...wow what a difference it made and they got rid of the famous q-jet bog.

http://www.smicarburetor.com/

grandsport · #6 09-20-2010, 11:21 AM

Contact info for SMI,please.

RBeckman · #7 09-20-2010, 11:52 AM

Quote:

Originally Posted by grandsport

Contact info for SMI,please.

Look above in my last post....I put in a link, but being the nice guy I am I will spend TRW's valuable time and repost it...ha http://www.smicarburetor.com/

Do you know the numbers you need? I have three of them at home including the one that is on my car and I can check them. Also, on the master cylinder do you know what and where the numbers are and I will check the one that is on my car and the rebuild one I have. I also have a contact at Cardone (Remanufacture) that does master cylinders and I can contact him to see if they can look at their cores.

grandsport · #8 09-20-2010, 12:12 PM

Ric,the carb number is 7040204 and build date on my car is April 70. The master cylonder needs a casting number with a 409 in it and bb stamped on the front. Thanks.

Chevelle_Nut · #9 09-21-2010, 06:40 PM

I have to differ about SMI, they are ok but not great. My carb had problems when I got it, I had to buy a low pressure fuel pump 4-6 psi or else it would flood.