Selling my turtle :(

[1970Turtle]

Hate to sell but have no choice, need the money . 1970 Chevelle Malibu with numbers matching 307, powerglide, and 10 bolt rear end. Great daily driver, will fire right up and drive anywhere. Great for someone to drive daily and restore as you want, and the ice cold A/C will keep you cold even in the hot summers here (I drove it all last summer, and winter heat works well also) Here is a list of parts installed:
-Completely rebuilt drum brakes all the way around (new shoes, new wheel cylinders, new master cylinder, and new hardware kits)
-New Monroe Sensa-Trac shocks on all four corners
-New Eibach 2" lowering coil springs up front
-New front suspension (Center Link, Inner and outer tie rods, tie rod adjusting sleeves, ball joints, control arm bushings, and pitman arm) all MOOG parts
-Rear tubular lower control arms
-HEI ignition
-New Thermostat, thermostat housing, and upper radiator hose
-New Alternator
-Starter replaced about two years ago
-New transmission filter and gasket
-New Holley street avenger 600cfm electric choke carburetor
And here is a list of NEW parts not yet installed but DO come with the car
-Edelbrock dual plane intake
-Full length headers with extenders and all gaskets
-2.5" mufflers
-Rear tubular upper control arm
-Rear upper control arm energy suspension bushings
-Accel hi-performance wires (currently has accel wires installed, but the new ones are a little better)
-Driver's side rear quarter patch panel
-One gallon of DuPont snakeskin green paint (found on '08 Dodge Viper) and one quart of black (for SS stripes) (over $600 in paint)

Have receipts for over $1200 in parts, not to include labor. Interior is complete, has AM/FM CD MP3 player that the previous owner installed. Now for the bad, the front floor boards need patched (just patches will fix, no need for full floor boards), front driver's side fender needs replaced, passenger side fender needs a lower patch panel, passenger side rear quarter needs a skin, needs a rear bumper, hood has small holes where a cowl was installed, cowl needs patched, and doors need a little attention. Email for pictures (I have plenty) and with any other questions. Price is $6,500 o.b.o. no trades.