![]() |
|
|
|
#1
|
||||
|
||||
|
It was a great day yesterday for a cruise! I rode to the shop with the windows down and sunroof open and it was beautiful!
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA |
|
#2
|
|||
|
|||
|
I drove it to work today with the top down.
__________________
John |
|
#3
|
|||
|
|||
|
so after spending about 4 hours in the garage today my brother in law and i did a lot but encountered a lot! so this weekends plan was the following:
get the shifter installed correctly gas tank installed fuel line ran belt for water pump and alt dash harness I got 1.5 out of the 5 done. We got the gas tank and popped out the old sending unit not a big deal. put in the new sending unit no problem. we picked up the tank and it sounded like a rock or something was in it! we shook the tank and couldn't figure out what it was. Called a friend and asked if it was normal. we couldn't even see it! finally i said screw it lets see if can see it. and we must of rocked it for like an hour! Finally after playing with it enough we got it to get it loose from what ever it was stuck on and we rocked it and we jumped for joy when we finally saw it roll by in the tanks. We finally got it to stop right in front of the hole for the sending unit! we pulled it out and it was a broken part from the old sending unit! we shook the tank for about another good 10 mins and no more sounds! we flushed it out to make sure nothing else was floating around in there and we found nothing! that was the .5 of what we got done. the other thing we got done was installing the shifter! man what a pain in the butt for someone who has never done it before! but after many google searches and finally finding a picture of it on chevy hardcore and following the instructions i sat in my car and i was able to bang on all 5 gears! 1-4 and R i was so happy i almost cried...lol
__________________
2005 dodge magnum daily driver 1988 mazda rx7 LS6 swap 1969 SS work in progress |
|
#4
|
|||
|
|||
|
Tried to find a radio delete plate with no luck.
|
|
#5
|
|||
|
|||
|
What year radio delete plate do you need?
__________________
1972 SS 454 Chevelle LS5/M21/12 bolt 3.73 posi 1969 Malibu COPO L72/M20/12 bolt 3.31 posi 1968 Malibu LQ9/4L80E/12 bolt 3.73 posi |
|
#6
|
|||
|
|||
|
Installed the new SMI Q-jet carb, a new prebent pump to carb fuel line, and a few assorted under hood goodies that arrived from Hinshaws yesterday afternoon.
If I really focused on it, I could probably get the '67 running again in an hour or so. But...not in any real hurry. Heading for Ireland next Wednesday... Damn, that smilie looks like a Guinness...
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD |
|
#7
|
||||
|
||||
|
New brakes and master Cylinder filters and plugs
Sent from my HTC Sensation 4G using Tapatalk |
|
#8
|
||||
|
||||
|
I didn't do anything to it. But...grumpy did tell me that he will have air conditioning put in the car by the summer. Woo Hoo ! I am gonna hold him to that one.
__________________
Get in, sit down, shut up, hold on...cause Ms Grumpy is driving ! For the audio geek try: www.audiokarma.org |
|
#9
|
|||
|
|||
|
I dropped the top and drove it up to the bodyshop to let her visit her cousin the 72 Fleetside truck .
__________________
John |
|
#10
|
||||
|
||||
|
Family is important !
__________________
Get in, sit down, shut up, hold on...cause Ms Grumpy is driving ! For the audio geek try: www.audiokarma.org |
![]() |
| Thread Tools | |
| Display Modes | |
|
|