|
|
|
#1261
05-19-2013, 09:35 PM
|
||||
|
||||
Did nothing with my car but did do some international Chevelle/Ausley's representing across our friendly boarder to the north.
 I have never seen SOOOOO many Starbuck's per square foot! Quite literally, standing on one corner you can see another Starbuck's across the street on the other corner. 
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA Last edited by fleming23; 05-19-2013 at 09:41 PM. 
|
|
#1262
05-20-2013, 07:19 AM
|
|||
|
|||
|
Wow Eric!!
We we're in the Buffalo area all weekend. Had lunch on Saturday at a place right on the Niagara River in Tonawanda. Did you drive or fly?? We flew back yesterday afternoon...
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD
|
|
#1263
05-20-2013, 09:05 AM
|
||||
|
||||
|
Quote:
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA
|
|
#1264
05-20-2013, 09:26 AM
|
|||
|
|||
|
We flew on 1st flight out on Friday...leaving around 8am...and returned yesterday afternoon on the 1:15pm (which was 1/2 hr late due to ATL weather).
Although I had to return to Hartsfield last night @ 10pm to claim our bags.  Buffalo weather was awesome all weekend. Your 1st trip to Niagara Falls/Canada? I was born/raised in Tonawanda, NY and still have most family in that area. My brother's daughter was married on Saturday.
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD
|
|
#1265
05-20-2013, 10:05 AM
|
||||
|
||||
|
Quote:
This was our first time to Niagara. Had a great time and agreed, it was a beautiful weekend! We had some time to kill and drove all around Tonawanda before heading to the airport. If it were not for all the snow I would consider living up there!
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA
|
|
#1267
05-20-2013, 06:45 PM
|
||||
|
||||
|
After spending the last 4 days in South Carolina, I just had to peek into the garage this morning to make sure my baby was still sitting there. Put a smile on my face after an all night, 13 hour drive.
__________________
Get in, sit down, shut up, hold on...cause Ms Grumpy is driving ! For the audio geek try: www.audiokarma.org
|
|
#1269
05-21-2013, 06:58 AM
|
||||
|
||||
|
Bought a new set of tires for the Chevelle. Had the old ones unmounted and rims sandblasted. I've got them primed, gray paint on the back and inside. Black in the inserts, just need to mask and spray the silver. I know they make a stencil where you do the silver first then use the stencil and spray the black. Also heard the stencils weren't so good. I actually did a set back in the 70's, masked off the black and spayed the silver last. It worked good then so I thought I'd do it that way again. Fortunately I have a 2nd set of SS wheels and tires to use while I work on these.
|
|
#1270
05-21-2013, 09:38 AM
|
||||
|
||||
|
Changed plug wires out and put heat boots on ends near headers.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
