|
|
|
|
|
#1
01-28-2016, 06:00 PM
|
|||
|
|||
FYI...for future reference for others doing this upgrade.
Yes, the Lee adapters are no longer available but there is a substitute available from Speedway Motors... http://www.speedwaymotors.com/O-Ring...ter,24682.html
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD 
|
|
#2
01-28-2016, 08:22 PM
|
||||
|
||||
|
The hose I'm using is a Duralast 71074 I picked up from autozone. It could be shorter, but it works great once you get it tweaked a bit so it's situated right.
 
__________________
1964 Malibu SS, now a LS1 and T56, Back halfed, rollbar, narrowed 9 inch, 4.11 gears and 31x16x15 Mickey SSR's on Weld wheels. Last edited by Rattler; 01-28-2016 at 08:24 PM.
|
|
#3
01-28-2016, 09:38 PM
|
||||
|
||||
|
I'm probably running a different power steering pump then you if you have the truck pump. You might even check into the hose that fits the truck your motor came out of.
__________________
1964 Malibu SS, now a LS1 and T56, Back halfed, rollbar, narrowed 9 inch, 4.11 gears and 31x16x15 Mickey SSR's on Weld wheels.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
