No problems. Easiest system in the world to bleed. Start with the farthest away. Passenger rear. Do the drivers rear next. Then passenger front then drivers front.
Before you start take the line loose from the master cylinder and hold your finger on it. Have some one press the brakes. Put the line on after it is shooting fluid and the air is out. Do that to both of them to bleed the master cylinder before you start.
After a few times just check the fluid level. Keep it full or you got to start over if you use all the fluid in the master cylinder and pump air in it.
|
07-12-2016, 12:47 PM
Threaded Mode