ChevelleForum.net

Go Back   Chevrolet Chevelle Forums > Chevrolet Chevelle Garage > Chevelle Interiors

Reply
 
Thread Tools Display Modes
  #1  
Old 09-22-2016, 08:57 PM
chevymaher's Avatar
chevymaher chevymaher is offline
Senior Member
 
Join Date: Mar 2014
Location: Kentucky
Posts: 1,487
Default

That shouldn't come apart. It is a 2 part deal. Switch and the tumbler that fits in. Exception being the part that screws on and holds it in. Part of the switch when you buy it.

But the switch should not have come apart like that. Sounds like you need to buy a new one. I had 5 dashes and no keys. I destroyed a few trying to get them apart. So I am familiar with the parts you describe that shouldn't have come apart.

I ended up buying one. It was no harm no foul in my case I was getting a new bezel I just needed the metal backing plate. Turns out I had 67 switches in 2 of them and only one had the "Quote" correct 68 switch in it. They used up old stock I am sure before they switched over. I had fits trying to get that together till I figured out there were 2 different backing plates depending on which switch was used. And the screw on piece matches the switch, not necessarily The dash bezel piece. Oh I was having a blast doing that. But enough reminiscing I got it done.
Reply With Quote
  #2  
Old 09-23-2016, 03:42 PM
67Chvl67 67Chvl67 is offline
Junior Member
 
Join Date: May 2015
Location: Massachusetts
Posts: 26
Default

Quote:
Originally Posted by chevymaher View Post
That shouldn't come apart. It is a 2 part deal. Switch and the tumbler that fits in. Exception being the part that screws on and holds it in. Part of the switch when you buy it.

But the switch should not have come apart like that. Sounds like you need to buy a new one. I had 5 dashes and no keys. I destroyed a few trying to get them apart. So I am familiar with the parts you describe that shouldn't have come apart.

I ended up buying one. It was no harm no foul in my case I was getting a new bezel I just needed the metal backing plate. Turns out I had 67 switches in 2 of them and only one had the "Quote" correct 68 switch in it. They used up old stock I am sure before they switched over. I had fits trying to get that together till I figured out there were 2 different backing plates depending on which switch was used. And the screw on piece matches the switch, not necessarily The dash bezel piece. Oh I was having a blast doing that. But enough reminiscing I got it done.
I hear you about it not supposed to fall apart. The metal part is ok, the cylinder and the body of the switch are ok. The part that has the wires coming into it that attaches to the back of the switch, that part fell off. I'm guessing the two springs push the round thin gauge piece against the contacts. Not sure how and not sure that a third spring may have escaped! In the end, I may need a new switch... ugh!

and correct, the set I had delivered yesterday has just the two stopsign keys. More original to the car anyway.

Last edited by 67Chvl67; 09-23-2016 at 03:44 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:57 PM.



Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Audiokarma.org