|
|
|
|
|
#1
09-12-2011, 08:02 AM
|
|||
|
|||
how hard is it to redo your seats?
OK so my seats are not in good shape at all. So since i am working on my car from the back to the front now my rear seat is just about up to be next to be repaired. So i was looking online and it seems pretty simple just need time and a lot of beer..lol. so my question is, is it worth doing it on my own or paying someone to do it for me?
__________________
2005 dodge magnum daily driver 1988 mazda rx7 LS6 swap 1969 SS work in progress 
|
|
#2
09-12-2011, 09:06 AM
|
||||
|
||||
|
Some good reading on this subject, enjoy!
 Front buckets http://www.chevelles.com/forums/showthread.php?t=118256 Rear bench http://www.chevelles.com/forums/showthread.php?t=337465
__________________
ACES #08588 1970 Chevelle SS 1970 Olds 442 Survivor
|
|
#3
09-12-2011, 09:23 AM
|
|||
|
|||
|
thanks that rear one is perfect since i am going to start on that next. I hope soon i can start it once i finish the trunk so that way i can say i am making progress
__________________
2005 dodge magnum daily driver 1988 mazda rx7 LS6 swap 1969 SS work in progress
|
|
#4
09-12-2011, 09:54 AM
|
||||
|
||||
|
The rear seat is definitely the easiest seat to redo as well. I would highly recommend giving it a shot as there really is not much to doing the back seat. Lay the covers out in the sun prior to getting started so they are warm and pliable and it'll make your life a little easier. If you have a small (kid sized) helper you can have them help by sitting on the seat frame to compress the springs when you are hog-ringing everything in place. The front seats are a little more involved but still nothing that can't be done on your own. I will say this, just like when you lay down new carpet in the car, be sure to put your screws in prior to placing the cover on or you may never locate the holes for you seat bumpers, etc.
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA
|
 |
|
|
Hybrid Mode
