![]() |
|
#1
|
|||
|
|||
|
I need a back seat for my 68 Malibu. I am pretty sure the 68-72 a body ones will work. What about 68-72 a body 4 door models? Also, will 65-67 ones work? Thanks.
|
|
#2
|
|||
|
|||
|
I think they are the same except for convertible rear seats are not as wide ,4 door seats are the same too.
__________________
John |
|
#3
|
||||
|
||||
|
The answer is NO. The seat is wider on '68-'69's than on '70-'72's. On '70-'72's the seat is narrower because of the side armrests being moulded into one piece that goes all the way down to the car's floor, and the seat backs have a spacer on each side to make them the same width as the bottom seat. By comparison, the seats on '68-'69's go all the way to the "door panel" (which is more flat) with a smaller armrest which is screwed through the panel, in the same manner as the armrests on the front doors and to make it more complicated- the BOP cars 68-69 had interior options that gave them the possibility of a wider OR a narrower rear seat... and the narrower rear seat was still wider than the convertible rear seats, which were the narrowest. No sure on a 4 door.
__________________
Ray 1970 SS Chevelle Van Nuys Built Last edited by shadowgray396; 10-06-2012 at 07:33 AM. |
|
#4
|
|||
|
|||
|
Quote:
|
![]() |
|
|